Update on adjustable control arms

Well I thought I'll just cut the old strut rods and it will be a piece of cake to put the new ones in, wrong. You can't install the bushings separate because you can't get the pivot bolt in the bracket once the bushings are in the K frame. You have to install it assembled. The rear bolt goes through the control arm and threads into the rod, this isn't a straight shot, it's out of line a little meaning you have to screw the allen head bolt in while trying to hold the tube from turning but the tube has no wrench flats on it. Same deal with trying to adjust it and then the pivot bracket and heim joint have to be aligned just so because the heim joint twists as the control arm sweeps through its arc.