Sealing a SixPack Hood to the Carb
Last one. Here's how I did it: The small metal ring was made by a friend and is a take off from the plastic one that you can buy from Moroso. Moroso has a few different heights you can get, I got the 2" and cut it down to where I needed it. That sits on the carb, then I have a flat air cleaner base which sits on top of the metal ring (for stability of the fiberglass base plate), then the re-pro shaker base sits on top of that, then the air cleaner assembly. The lid was one of those un-silenced types which I cut the sides off to use just the top. Hope all this helps you out!! Greg.- As I posted on the other site, I used 2x2" AC sealer foam, set playdoh on the base plate, shut the hood and measured how thick I needed the foam all the way around, then cut it down. I have the Moroso foam which I will use next year and there will be only one seam as the store bought AC foam came in specific lengths
Last one. Here's how I did it: The small metal ring was made by a friend and is a take off from the plastic one that you can buy from Moroso. Moroso has a few different heights you can get, I got the 2" and cut it down to where I needed it. That sits on the carb, then I have a flat air cleaner base which sits on top of the metal ring (for stability of the fiberglass base plate), then the re-pro shaker base sits on top of that, then the air cleaner assembly. The lid was one of those un-silenced types which I cut the sides off to use just the top. Hope all this helps you out!! Greg.- As I posted on the other site, I used 2x2" AC sealer foam, set playdoh on the base plate, shut the hood and measured how thick I needed the foam all the way around, then cut it down. I have the Moroso foam which I will use next year and there will be only one seam as the store bought AC foam came in specific lengths
