Pilot Bearing

-
F

FASTBACK340

Legandary Member
Legendary Member
Joined
Jun 2, 2004
Messages
5,034
Reaction score
39
Geee.... Just ONE of the downsides to our "new" board is that we lost all of our previous posts that were saved from back when it had "no personality". I'm so happy things are better....


Anyone remember the exact application I need for the pilot bearing for a 4 spd MP short block? I think it was Dakota.

BTW: Where all the stuff you promised Joey? Shirts...Hats....Window stickers? At this point I think you lost interest. Or just don't give a rats-***.... which is really a shame. I used to love coming here.
 
You should be able to use a conventional bronze pilot bushing that presses into the crank. The Zoom clutch set I purchased for my 360 swap came with a new one.

If you want to go with the late model roller bearing any truck 92 or newer with a 3.9/5.2/5.9 magnum engine uses that bearing. It fits into the torque convertor recess on the crank.
 
dgc333 said:
If you want to go with the late model roller bearing any truck 92 or newer with a 3.9/5.2/5.9 magnum engine uses that bearing. It fits into the torque convertor recess on the crank.
Click to expand...

That's what I'm looking for. Thank you for the quick reply!
 
Hmm.... Thanks DGC.

Summer is so slow for the web and I've been very busy on personal stuff lately that I havent been doing alot here, but thats gonna change soon. I should have my personal crap out of the way in a month and can buckle down for the winter and really kick ***.
 
Joeychgo said:
Hmm.... Thanks DGC.

Summer is so slow for the web and I've been very busy on personal stuff lately that I havent been doing alot here, but thats gonna change soon. I should have my personal crap out of the way in a month and can buckle down for the winter and really kick ***.
Click to expand...

What sort of stuff are you planning?
 
Well - Shirts - Hats - Decals - for starters --- :) Those are actually in process as we speak.
 
Joeychgo said:
Well - Shirts - Hats - Decals - for starters --- :) Those are actually in process as we speak.
Click to expand...
Free for all members? Cool! :violent2:
 
You must log in or register to reply here.
-

Back
Top