Exhausted Demon Frustration

Headache Remedied!

Realizing the clearance was within a 1/4 - 1/2 inch or so, an A Body fanatic friend (and header hater) told me to try using a /6 motor mount (less than 5 Bucks @ NAPA) on the DRIVERS SIDE... Voila! With a little persuasion and removing the back tranny mount, the motor mounts dropped into the K member and gave me just enough clearance for EVERYTHING.

Hmmmm... Seems easy now - And, I guess TTI's DO fit! I will let you know when the key turns. . .

Thanks for the PM's and replys!