I must be dumb... Fender help?

Ok... It all makes sense except that one bit right above the caption. It has labels of "Pillar Support" "Side Shield" "Cowl" "Cowl Bracket" and "Fender". I can't figure out what they're trying to show there.

Any insight would be much appreciated.

EDIT:-----------

Ok... scratch the above. That's the bolt behind the top of the door. I took off the door and got that one. So I've gotten all the bolts along the top of the fender that connect it to the inner fender well. I've gotten all the bolts that connect it to the core support. Two in front, two on top. I got the four that hold it to the front clip (front clip is entirely off) I got the brace at the top of the wheel arch out, I got the bolt at the rear of the wheel arch, and the two under the door through the rocker panel.

Near as I can tell, that's every bolt. The fender will flap. The whole thing is loose and it comes away from the car at the bottom, but it's still not letting go at the top. It looks like there's some kind of adhesive between the flange on top of the fender and the flange on the inner fender well. I've looked and looked both at the diagrams and lists in this thread, and at the fender. There are no more bolts that I can see. There must be some kind of trick to separate the fender from the car at this point. Anybody care to clue a fellow in?