A-904 Throttle Pressure Adjustment

Can I use the TV adjustment procedure at the following link for my stock rebuild?

http://www.tciauto.com/Products/Instructions/instructions/220000_inst.htm

Step 26 says "Insert the 1/8" drill between the kick-down valve and the throttle pressure cam and adjust the throttle stop screw until it just touches the cam." This is with the TV uncompressed. My ATSG manual says to use that special tool (spacer of unknown dimension) with the TV fully compressed.

Not knowing the specs for the special tool, can I use the Trans Scat procedure for TV adjustment on a stock rebuild instead?