ok, this is what i have come up with as a good budget build for my car.

If you are not going to buy aftermarket axles (which would I think, be the best idea) I have heard that C-Body 8.75" axles are long enough that when you cut them down to the length you need, the "spline area" is beyond (closer to the flange/outside end) the necked-down, problem area... so, you can have shortened axles with proper splines installed.

But, don't take my word for that; I have never done it, but maybe you could put up a new post about that and someone who has done it will respond.

I have had no problems with my Professional Products Crosswind and am curious as to what you've heard. Can you elaborate, please?

Thanks for any info...

Bill