I dont think the bushings were install right

They all say they can do the job right. The pin should go into the bushing first, then the bushing into the LCA WITHOUT pressing on the pin.

Ok, upper bushings. You need a LONG 1/2" bolt with a nut and heavy washer the size (or slightly larger) of the OD of the bushing. Then you need a tube that is slightly larger ID than the lip on the bushing. Set it up in the press with the bolt THROUGH on bushing to press the other out and the tube for the bushing (placed under the UCA and against the plate on the press) to be pressed into. Turn it around and do the other bushing.

A slightly smaller tube can be used for pressing the bushings back in. Maybe next time I do a pair (some time in the next year) I will take some pictures.