This has been driving me NUTS

I went down to ATCO on there MoPar gathering day and ran an untuned carb and distributor to a 15.14 @ 89 w/2.2's for a 60 footer. Not bad for bolt on's and a baby Crane cam w/3.21 gears.
The engine is a 1979 - 318 that I added a LD4B edelbrock intake. The 625 Carter carb is topped with a unsilenced MP air cleaner.
Headers are Hookers with a Jegs exhaust @ 2-1/2 inchs. A Crane cam speced @ 272/284 (@.505 214-228) w/.454 - .480 lift on a 112 c line. Electric fan and orange box.

A stock sized tire resides on all 4 corners. The 3.21 - 8-1/4 rear has a sure grip.

OH, 14's are very possible with this set up. It could use more compresion than the dead on it's heels 7.5-1 ratio and some port work on the heads would be great.

After reading below, I edited this and figure it's possible with my build and some gear.