Complete 8 3/4 Craigslist Atlanta

It should bolt up if you pull the springs out 1/2" on each side. Not a big deal, been done thousands of times. If you want, you can move the perches in the 1/2" on each side.

Wheels may need some more backspacce as the rear is a bit wider than an A body rear, 1-1.25" or so on each side.

The u joint may or may not be the same. Could be a 7290 joint. I doubt your Cuda has a 7290 driveshaft, so a combo joint may be required. Also the driveshaft will need to be shortened slightly, about 1" IIRC.