Unfortunately the A series vans and trucks (64-70) 8 & 3/4's are too wide plus they have the spring perches welded on the top of the tubes rather than on the bottom. The shock mounts are welded on the bottom of the tubes. I parted out a 69 A van but did keep the rear end housing in order to get it shortened at a later date.. By the way, most of those older vans had either 3.55s (v8's) or 3.91s (slant 6). The van I parted out had 3.91s which were sold to a gentleman from Sweden. Most A rear ends were peg legs but have seen S.G. in some.
