318 combo's

Well here is mine: Mind you this is a 12 year old motor after the rebuild, it has run a best of 13.55 @ 102 mph but now 12 years later it has run a best of 14.14.
Stock '68 318 .030 over block with sealed power hyp. pistons. balanced and windage tray.
Heads are stock heads with 1.88 1.60 valves installed and then gasket matched and the bowls cleaned up. Comp Cams 280H. Cast iron 4bbl intake with a Thermoquad with drilled out squirters, high volume needle and seats. TTI headers w 3" exhaust to the axles.When it ran the 13.55 it had 3.91 gears in it with street tires. The heads at the time were very cheaply done. We knurled the valve guides so that is some of the power loss I am guessing.

I am right now starting on a pair of magnum heads that all I need to do now is gasket match and clean up the bowls, I am not going to go too crazy with these heads. A air gap manifold will go on there with a holley 750 dp.

Oh yeah I have a 2800 stall in a A904 with a shift kit. Maybe tomarrow I will get a video up here with my roofless dart burning the hides:grin: