340 to 416 stroker build need advice
I bought my full rotating assembly from Frank at gofaststuff.com
Frank is a good guy and is very knowledgable. My kit included.
Eagle 4340 stroker crank
Eagle H beam rods with arp studs
SRP forged dish pistons with a -16.9 dish .040 over stock
Speed Pro Moly ring set
Clevite Bearings
Rotating Assembly fully balanced
SRP says those pistons are good for a 250 shot of JUICE.
$1800.00 Total Delivered to my door.
The balance was dead on. The SRP pistons had a slight edge on the dish that was easily taken care of with a little sanding to eleviate any detonation problems.
Frank is reliable and does what he says as far as my transaction went.
Hope this helps.