66 Barracuda 4 speed crossmember and floor tunnel
grumpus is right,63-65 has a round hole and 66 is oval and harder to find.I used an earlier one and screwed the oval boot on top of it.Also if you're using the factory bellhousing with the small clutch, the factory z-bar will work,but if you're planning on using the later bellhousing with the larger {10 1/2 inch} clutch,you'll have to modify the z-bar.I just bought mine from Brewers,he's done all the homework and it is a bolt on and go deal =D>:thumblef:
grumpus is right,63-65 has a round hole and 66 is oval and harder to find.I used an earlier one and screwed the oval boot on top of it.Also if you're using the factory bellhousing with the small clutch, the factory z-bar will work,but if you're planning on using the later bellhousing with the larger {10 1/2 inch} clutch,you'll have to modify the z-bar.I just bought mine from Brewers,he's done all the homework and it is a bolt on and go deal =D>:thumblef:
