Back on the Duster...aka what i did on my summer vacation

Well I've actually got a little done this week, man fitting tubing is really time consuming, trying to get everything lined up sure eats up time.

I have managed to get both side bars and the front cross bar tacked in, I wanted to keep the rear view mirror and visors in it so I installed the bar to where they will clear.

I will still have to modify the visors a little bit, but we have an upholstery shop next to us, and he's really helpful, so I'll get some advise from him.





I bolted the dash at the bottom, I will not have to cut any of the lower part of the dash, but up top, where the bars go through I trying to come up with some ideas for it.

One plan is to cut like a square out of the top of the dash where the bars will pass, then cut the square back down to fit and weld it back together, when the time comes for the final install.

I have to get the dash to bolt in so I can figure out the cross bar that will go behind the dash and also to see where the front tubes would want to mount up.

Hmmmm,,, I wonder what Foose would do? :confused: