hood pin location

-
moparwedden

moparwedden

Well-Known Member
Joined
Apr 13, 2006
Messages
770
Reaction score
14
Location
trenton,ontario,canada
Well I Have A 72 Duster And Need To Find Where These Pins Are Located On The Hood And Rad Support. Does Anyone Have Pics And Measurements I Can Have. Even A Template Off Of One Would Be Great. Thanks Guys.
 
I was under the impression that the rad saddle has a dimple, fro the hole location.


If not I can take the measurement for you, let me know.

Giles
 
My support brace had a dimple:

DSCN3820.jpg
 
340butterduster said:
I was under the impression that the rad saddle has a dimple, fro the hole location.


If not I can take the measurement for you, let me know.

Giles
Click to expand...
Thanks Giles But Mine Does Not Have The Cut Out You Have. Did You Have To Put It In. As Far As The Dart, The Saddle Looks Different So I Don't Think That Will Work. I'll Check To See If There Is A Dimple Where Yours Is Located.
 
I'm back with pictures, and yes those cut outs in the saddle are factory.
Do you not have a slotted area, on the underside of hood, for where the hole needs to be, kinda like for the scoops, there should be a location for it.

From the front of hood 4 1/2", pic. #1.View attachment 74155

From side of hood, 3 1/8", Pic#2View attachment 74156

From inside fender, 3 1/4", pic#3 View attachment 74157

From saddle lip, 5/8", pic#4 View attachment 74158

Hope this helps.
 
No I Do Not Have The Cut Outs. This Rad Support Came Out Of A Donor Car From The Wreckers. Can't Remember What It Came Out Off. Well Out To Drill The Pins. I'll Be Posting Pics Of My New Hood.
 
You must log in or register to reply here.
-

Back
Top