64 Dart Front Drum Removal (and more!)

If your drums are still swaged in then you will need to find a shop that has the bit to cut them off. it looks like a hole saw that fits over the stud and cuts the area around the base off. to put them back on you do not need to swage them back on. just keep it like the rear so it slides back on and off. this is if you need new drums, if not like stated earlier you just pull the drum and hub off as an assy. and bring the whole thing in. it still mounts on the lathe only with different adapters. i have done it quite a few times.

oh, and yes if you do need new drums then yes you will also need new studs.