Shifter Troubles

The shifter linkage for 3-4th gear needs to be opposite of the picture you
are showing.The rod needs to be up like the 1-2 shifter linkage. That rod
also looks like it may be bent at the shifter.I do not think that linkage for
3-4th gear will work properly.Where the linkage threads into the shifter
needs to be straight so you can adjust the linkage.When you adjust the
linkage a 1/4 in drill bit or bolt will keep things lined up.Disconnect your
linkage,slide your bit or bolt through the shifter and in slot of the shifter
plate, and adjust your linkage.Make sure trans is in neutral.I would contact
Brewers Performance for some advice.They are good people to deal with.
The no is 937-698-4259.Good luck.