I hope someone can point me in the right direction?

you can bleed the master cyl on the car through the lines , you didnt mention the rear brakes. check the adjusment on them, and bleed every thing from the farthest point first, except for the master cyl ,that gets bled first, make sure the master is for dick brakes, they are different, it should work temporarly with out the prop valve ,i think...some one else may know for sure as i have never tried it....make sure you didnt trip the switch for the brake light on the dash, if you did it wont bleed properly untill you reset the switch....hope this helps...good luck