easy engine mounts

Ok after reading countless post about engine swaps and "how-to's" buy a $150 schumacker kit, ect... I decided to try and help some people out.

I figured this out when I was working on a 71 /6 Duster I was selling to a guy- he wanted me to mount a V8 in it, so I built up a little 318 (85' if it matters) and started to contemplate on how I would modify the mounts to fit the V8 as I didn't have a V8 K-frame and wasn't making alot of $ off of the job. Then while taking a break from "working/thinking" I was thumbing through a mopar mag and saw the Schumaker add. something looked really familiar about their kit... So I went over to my parts pile and dug for a minute or two and tada! a truck motor mount, I placed the truck mount on the right side of the engine and a stock early V8 mount on the left side. Now for the insulators, this is where my memory gets fuzzy- I know that one was a stock 71 Duster V8 insulator and the other I think was listed under 68' Charger? or similar- the same design but about 1/2" thicker. The thicker one goes on the Right and the thin one goes on the left. I checked and rechecked every measurement I could think of against my stock 74 swinger and a buddies stock V8 Demon, and everything was just right. I Just want to help a few people save some money- I just don't see the point in that price for such a simple swap. :thumblef: