I Want To Build A Stroker Engine

Got One Better For Ya! Take Your 318 Buy A Kb399 Piston With Open Chamber Head Decent Cam Convert To E85 (110 Octaine For 1.99 A Gallon) I Was Going To Go With A 318 Stroker But After Learning About E85 I Can Make The Same Power With A .060 Over 318 Stock Stroke With 302 Castings With Mild Port Work Done To Them They Should Flow To Make At Least 400+hp. I Know Some May Disagree On Here, But Numbers Dont Lie! 190cfm @ .500 Lift Thats A Stock 302 Casting Flow Number At 28 Inches Of Water, 190x.25714x8=390 +/- 5 % So As Little As 370hp And As Much As 410hp In Stock Castings. And To Do The E85 Conversion Its A Simple As Using A Holley Blue Pump And E85 Carb (e85carb.com) Or If You Have A Holley Mech. Secondary Buy The Conversion Kit For 300.00 And Boom You Got Yourself A High Compression Alcohol Breathing Demon!!! So Just One More Opinion To Consider Good Luck Either Way You Go!!!