My car is Missing

bamacuda said

before you change all the wires one at a time (which is fairly time consuming), follow redfish's advice and check/change the distributor cap. At high rpm and/or load, a tiny bit of carbon, moisture, etc. can cause the exact same problem as a bad plug wire.

Click to expand...

That is what I plan on doing first and hopefully that is where the problem lies.. Thanx bamacuda
Well just got thru swapping out the black D-cap back to the Accel Tan cap and the engine does seem to run a bit smoother. Sitting at an idle in park and reving it up there is no noticeable miss,the "R"'s really climb, only when in gear starting out and going down the road there is a miss. I am now definetly leaning towards the plug wires, like a lot of people have said. I dont know if this has anything to do with it or not but in the past I have always cleaned the plug wires with a rag and a little kerosene, takes the grim and so forth right off. Now I am wondering if kerosene has penetrated the wires and this is what could be giving me problems. I will find out once I get them assembled.
__________________