Can I remove the windshield on my 65 myself?

I removed my back window by myself but it wasn't easy. Kinda hard to push on the window and hold the gasket back at the same time. So what I did was I had some sheet metal strips about 8 inches long. I put a bend in them about 1/2 inch from one edge. I then used them to wedge between the glass edge and the gasket holding the gasket even with the glass. The corners will still be over the glass but you can push on the corner standing on the outside while pulling back on the gasket corner to get it started pushing out. I put the sheet metal pieces along the top and sides since the glass lifts out from the bottom lip anyway. Once the glass freed the corner, it was simple to get the glass edge to clear the gasket since the sheet metal pieces were already holding the gasket even with the glass edge. Make sure you loosen the gasket on both sides so it moves freely before inserting the strips. I have priced glass for a 63 so I would assume you can get glass for a 65.