Another fine mess...75 Dart Swinger...

Quick update, as everything has fought me every step of the way, the Pypes exhaust was no different. Not a single pipe lined up right. I had to make several pie cuts and had to reweld to get the proper angles from the headers to the tailpipes. I finally got it in, but it took 8 hours of work for a 2 hour job (not to mention running out of welding wire, thanks to Home Depot for coming to the rescue). The right side hangs a little lower than the left, but its still no lower than the headers.

I did try to start it last night, but the first crank was to try and get some fuel into the carb, no joy. I pulled a dummy move on this one, I hooked up the fuel pump backwards! DOH! After that I tried to start it again, no go. I have spark, fuel, crank, but it wont fire. I next have to check the dist phasing tonight, I am also pretty sure that the nuetral safety switch is bad.