I Give Up!! Not enough Throttle Travel

I had the same issue with my 67 Barracuda when I went from a 2barrel to a 4. I am using the Lokar cable and it didn't quite travel enough. After much adjusting and moving and using different angles, clamps etc., I took the simple way out. I bent the gas pedal and greated more travel to the floor. A little heat , some gentle bending and I was home free. You will have to do some trail and error. You don't want too much travel, that can be hard on the linkage. If you reach the floor with your pedal and you run out of travel in your linkage, oops, your bad. Worked for me.

69Chrgr said

Thanks guys, I've tried all three different points on the carb to no avail. I've also "shimmed" the pedal assembly to no avail. I think my only option now is to modify the pedal assembly. I'm no rocket scientist, but something so simple is really frustrating me!

Click to expand...