'64 Dart Wheel Stud Specs

Okay, so i found a place that sells LHT studs, but i need to know the specs. I have a '64 Dart with a 225 Slant 6. non-power drum drum brakes.

I think they are 7/16 - 20L

Need to know Length, Knurl Dia, Shoulder Dia,

Thanks to all!
PJ

Here is the link for anyone interested!
http://automotivefasteners.thomasne...asteners-rods-and-studs/wheel-studs-and-bolts

I've went into NAPA & told them what I had and they had them on the shelf! My $.02, just a thought! Good Luck! I'll start looking through my 64 shop manual...............................back in a min.....................

My manual shows:
Dart All Models
Stud hole circle 4"
Stud size 7/16" - 20
Torque 55 ft lbs

"Dodge 6 cylinder"
Steel Disc Drop Center Safety Rim:
Stud hole circle 4 1/2"
Stud size 1/2" - 20
Torque 65 ft lbs

Does that help?? Good Luck!

knurl .563 and shoulder 17/32 for cast drum and .570 knurl and 7/16 shoulder for steel encased drum. any auto store should carry dorman studs to change yours out