Car won't start, No spark

First, take off the distributor cap and make sure the shaft is spinning when you crank the engine. If so, next check to be sure you have approx. 6 volts at the coil + terminal when the key is in the ON position and approx 12 volts when the key is in the start position. If so, next check to see if you have continuity through the distributor pickup coil by using an ohm meter on the 2 wires that are for that circuit. I like using the ones right on the control module plug so that it tests the wiring harness also. One of those test should reveal the problem.
Good Luck, Mark