Anybody ever use one of these intakes? Weiand #7510

Yea Moper, we have one of those for an rb with a one inch spacer on it we ran on an stock stroke 440 with 906s with a small sft with a some je pistons w.polished stock rods(they r pretty we still have them I'll(pistons r junk but the rods r nice) post a pic of them with really polished beams sometime) had it in out 67 gt b4 it had anything done xcept the bigblock swap still on the little 26x8s even lol wasnt even running a hood lol ran mid 11s with it not being able to launch very aggressively at all. Now same car has a beefy shortblock and some touched up performer rpms went 11.02 running like *** a cpl weeks ago we'll be running it with our other cars this weekend at the armdrop thing here in woodburn so it should get a 10sec pass out of it(pump gas street car) not too bad for still just using superstocks and a snubber lol. We might put that intake back on the gt(its just keeping a shelf company right now as the gt has a performer rpm on it now.
AdamR, yea, I bet headers and some lower gears would have woke it right up. The first bb we had in our 67 charger was a stock (67 383 iirc)shortblock and some lightly worked on 906s,torker cam 230 on both sides iirc and 480 lift iirc(been 15yrs since we had that together and theres been alot of combos since but I think thats the specs on that cam) a torker intake(loosely similar) a worked on thermoquad, supercomps w/3in exh, and that motor ran great for what it was we bounced between 3.91s and 4.30s dunno which I liked better both were greatly entertaining:snakeman:
Thanks for the info,
Jr.