Adams 71 Dart
Car looks outstanding!!
As far as proportioning valve location if you order a rear brake line set for a disc brake car there will be a short piece of line approximately 12" off the distribution block going to the rear lines. That is where the factory put the proportioning valve; about 12" back on the frame rail. Then the rest of the rear line hooks to the proportioning valve and runs to the rear of the car. So if you get the brake line set first then you will know where the proportioning valve is mounted. Most likely a hole will already be in the frame. Just need a self tapping bolt.
If you look closely at this picture you can see the line off the distribution block to the proportioning valve. While I run an adjustable valve it is in the stock location and lines are not modified.
Car looks outstanding!!
As far as proportioning valve location if you order a rear brake line set for a disc brake car there will be a short piece of line approximately 12" off the distribution block going to the rear lines. That is where the factory put the proportioning valve; about 12" back on the frame rail. Then the rest of the rear line hooks to the proportioning valve and runs to the rear of the car. So if you get the brake line set first then you will know where the proportioning valve is mounted. Most likely a hole will already be in the frame. Just need a self tapping bolt.
If you look closely at this picture you can see the line off the distribution block to the proportioning valve. While I run an adjustable valve it is in the stock location and lines are not modified.