Hello from California

>>>"I also want to drop the front end down a bit. Is it really as easy as releasing tension on the torsion bars and adjusting the camber?"

Yeah, just jack it up so the front wheels are off the ground, and get underneath (JACKSTANDS, PLEASE!!!) and locate the hex-heads that will be evident inside the lower control arms. Your lug wrench, I believe, will fit these two bolt heads. Give them about 6 turns each, counter-clockwise (remembering how many turns,) and let the car back down and check out the new, lower, ride height.

I imagine the front end will need a new alignment after you've changed the "altitude."

The nice thing about this is, if you don't like it, you can keep adjusting it 'til you get a "look" (attitude) that you DO like! Just one of the perks of owning a "vintage" MOpar...:cheers:


Best of luck...