Small Bolt Mopar Wheel Idea

I was of the impression that the slight difference between 4" and 100mm would be detrimental to your studs, maybe even bending them.

4" = 101.6mm

I took a brake rotor home to try on my Dart. It "fit", but rubbed against the edges of the studs. So if you tightened a beveled lug nut up tightly, the stud would kinda bend towards the hub. It might even make wheel removal difficult, with the studs now bending towards center.

Maybe with the right rims, this wouldn't be a problem, but I'm not going to try it.

But I can tell you which newer cars come with a 100mm bolt pattern, if you need to know.