Slant 6 power steering pump on smallblock? will it work?

mshred:
If the car is the one in your avitar, the pump itself should work, but you have to get the brackets off a V8 car. I don't think any of the pulleys will work, other than the p.s. pump. The alternator is the same.
I suggest that you find a small block V8 car at the junkyard approximately your year (it doesn't have to be a a-body)and take the pullys, brackets, and anything else you can think of that you need for this swap. If the p.s. pump is there go ahead and take it too, it might save you some grief changing the mounts. You may need to change hoses at any rate.
That's what i would do.
BTW, you know that the engine wiring harness (it could be modified), k member, and the throttle cable are different on a V8 to slant six swap, right? A bigger radiator is a really good idea too, especially with a 340.
Good luck on the build, your car looks great.:cheers:
Just my 2 cents,
Tom.