No brake lights

I just finished putting mine back together tonight, same problem (see help for an idot post). My issue turned out to be the jumper wire on the backside of the turn signal cam. I had to clean the terminal and bend the jumper wire with needle nose pliers so it made good contact with the terminals.
The pink wire going to the breaklight switch is the hot wire. Check it first, if you have power jump the pink and white to verify the switch is in working order or not...
The white wire from the brake switch runs up to the hazard switch in the column which then goes to the turn signal cam... A test light and some patience will solve the problem..
If you need I found a wiring schematic for my car online (pdf) at mymopar.com. They'll have one for your car as well.
Good luck!!!