340 tunnel ram

It does!



It runs fine and has tons of low end torque. Sure if I had a massive cam in there I'd lose low end, but that usually happens with having a lot of duration. I can see a small block being more sensitive to a tunnel ram, needing more stall and gearing. But it really does run well on my 440. The low speed torque is very strong on this setup. I've had a single four on hear and the dual quads on a dual plane CH28 Edelbrock manifold. It makes more power, with very little change down low. I run 3.23's an 28inch tires, it shreds the rear tires at will. I am surprised by this. I know if I had more duration I would need more stall and lower gearing. Also I drove to Minneapolis Saturday, about 80 miles on the freeway and got around 15 mpg! This was at 75 mph. I'm not trying to start an argument, I just think they are a lot more streetable than people think and assume.
not as sensitive on a small block as one would think.ive had a little time for tuning now and it works great.throttle response is is sharp.i have choke less 450 holleys and it starts an runs no problem.runs on the highway at 65 with a very light throttle,top end is outstanding.no disrespect toward anyones opinion,but it undeniably runs as good as it looks on my set up.