Another MSD problem

MSD ® Ignition Will not start the vehicle:

You will want to start with the Basics on your MSD ® Ignition not wanting to run. Make sure you have a solid +12vdc & Ground to your MSD ® Ignition check all connection points! Check the small Red wire coming out of the MSD ® Ignition box for breakage and poor connection at the switched +12vdc source. Make sure the+12vdc being supplied is not drifting around on your MSD ® Ignition, this will cause your unit to do dumb things. We have seem happen in some variation to many customers when it comes and goes without warning. Remember if the voltage gets below the +10 volt range the MSD ® Ignition box will shut down period.

Don,t know much about MSD, however found this troubleshooting site with (8) pages of ideas on problem topics. (can't hurt for starters) :thumblef:

http://www.msdignition.com/forum/archive/index.php/f-8.html