Dash Circuit Board Repair

The engineers deleted the printed circuit boards on e-bodies and created a mess ! You can make your own mess if you like but dont expect the next owner to be able to sort it.
The pins were originally swedged into the board. Exact replacements are impossible to find. You can attempt to solder the broken pins but soilder wont bond and hold them very well.
2 options, seek replacement boards with no loose pins or solder the pins and
bond them with epoxy. You will need to scuff the board so the epoxy gets a tooth but a 1/8 inch deep covering wont hurt anything. The connecters will still go on plenty far enough. All this is just so the pins dont pull out again next time you remove those connecters. Always pull those connecters straight away in the future. Good luck