Barracuda tire Question

Now i'm in the sh**. I found the correct height adjustments for the lower control arm/torsion bar. The book called for no more than an 1/8 '' difference between the lower ball joint (not grease fitting) and the swivel piece that the torsion bar goes through. Mine was off more than an inch on each side so I decided to lower the torsion bar to see how it would effect clearance. Three turns of the ratchet and the bolt popped out. The car sank several inches to the ground. The bolt has access steel and threads missing. The block it threads into has access steel and appears to be stripped. Now what???