upper ball joints

I did mine a few months ago get the special socket from canadian tire if your in canada or whatever your equal is in the US on the rent a tool program then put your 3/4 inch drive ratchet with 1" drive on it and use a bumper jack as a 4 foot extension just lube it up first and let it sit a day or so and if you have to use a torch to heat it up a bit but not too much or you will tear out the threads and make sure you let it cool for a while before you torque in the new one. This was the first ball joint I have done in my life took maybe 2 hours to do both side and my car is far from show more like most people parts cars