340 Engine
PM BJR Racing. He is one of us and can do it for less, and better! toolman
Thanks Mike,
I just finished a engine for 72scamp_swinger and this is what I did for $4,900.00.
Picked up and delivered to Huntsville, Al.
318 engine
Bored .030
New KB 167 pistons
New crank
new cam brgs.
new custom ground cam
square decked .027
balanced
assembled
new roller rockers
new chrome moly pushrods
new intake manifold
gasket matched intake manifold
replaced 1 rod
new rod bolts
new rings, oil pump, and roller chain and gears
new oil pump shaft bushing
brass freeze plugs
new gasket set
milled deck of heads .015
cut intake face .060
new moroso valve covers
new 950 quick fuel carb
new set of holley jets
bowl blended heads
gasket matched heads
flow benching before and after
new valve keepers
painted in his color and detailed
lucas oil zinc + additive and 20/50 valvoline oil VR1
lucas engine oil supplement
prime engine and has 75 psi oil pressure
Returned all old parts to owner if wanted
cut guides for seals
cut spring seats for dual springs
comp. valve job
set installed heights
spring shim pkg.
final results 462 hp @ 6500 and 430 ft. lbs. @ 4500 peaks
net is 376 hp and 372 tq. averages
