Post/debate your stroker small block builds here

I built my 408 for the "retro look" in a mostly street driven 72 Demon with a 4-speed and 3:55 rear gears.

443 HP @ 5800 rpm
460 Ft lbs Torq @ 4100 rpm
Carb to pan cost: $6300

LD 340 Intake

Camshaft - Hydraulic Roller (Cam Motion)
Duration Intake: 242
Duration Exhaust: 248
Lift Intake: 570
Lift Exhaust: 562
Lobe Separation: 110
Centerline (Installed): 105.5

Valve Springs: Comp Cams (994-16)

Crankshaft, Cast (Eagle) Internally Balanced Stroke 4.000
Pistons (Wiseco) PN: WISPT036H3
Bore: 4.030
Dish: 20cc
Compression Ratio: 9.9:1

Iron heads; casting # 4448308
Combustion Chamber Volume: 65cc; 2.02" Intake; 1.60" Exhaust

Flow Numbers
Intake Exhaust
0.100 Lift 64 50
0.200 Lift 132 98
0.300 Lift 184 136
0.400 Lift 226 175
0.500 Lift 254 189
0.600 Lift 247 196

Carburetor (Pro Systems Pro Series - XE)
Holley 4150 HP Main Body
Front Jets 78
Accelerator Pump 50 cc
Rear Jets 88
Accelerator Pump 30 cc

Kevco Oil Pan with Stock Oil Pump