Stainless braided trans lines

The teflon fittings can be a pain if they use the small little ferrule, the biggest problem is not getting a single strand of wire between the fitting and teflon liner. I had the same problem before and the guys at the local hose/fitting/rubber supply place gave me a quick class. Make sure that you cut the teflon as straight and clean as possible, razor blade with a little tap from a hammer, after rolling back the outer stainless. The stainless is only there for abrasion help. Make sure the fitting fits nice and square to the hose and is not cockeyed or it will seep. Good luck.