small block parts needed and barracuda stuff

The convertor number from Mancini is MRE-72711.

Here's a link to the Mancini site:

http://chucker54.stores.yahoo.net/maa711toco2s.html

The hub just needs to be machined more to fit the end of the crank. The problem we had was the engine was assembled already when we found out the converter hub needed to be machined. We went back and forth to the machine shop to get more machining done to get it to fit. After the 3rd try we just decided to go with the original unit. If we had the crank out of the engine, it would have been no problem but we were going back and forth to the shop too many times and it was just taking too long.

The hub has to have the finishing touches on it and if you have the crank it's no big deal.

I'd like to get $125 for it and the estimated shipping looks to be $32.50.

Ken