Stainless braided trans lines

Oh Yeah, TFE lines can be a pain. I've been doing them for years and still run a 95% leak-free rate on them. (It's just me, I get confused/rushed/distracted/stupid) Just take your time with them. Be methodical. Cut it, seperate the braid away from the teflon, insert the ferrule. Now this is where I learned my lesson. Seat the teflon to the inside of the ferrule with a rounded punch. This helps out so much. After it is seated, insert your fitting and then pull it back out to make sure you didn't mess up the hose. If it all is okay, reinsert the fitting, tighten that puppy up and go.

Revhendo