rear brake swap question

fishy68 said
I just acquired a nice set of 11x2" brakes. Not sure what their off of other than some other Mopar. My plan is to replace the small 10x1-3/4 brakes on the back now with them and hopefully have better holding rear brakes cause the stock ones suck. Question is has anybody done this and if so what brake drums did you use? My axles are stock but Moser re-drilled them to the large pattern and installed 1/2" studs so the drum would need to be large pattern.
Click to expand...


11"x2"? That's what the front of my B-body has. The 11" rears I have are all 3". That's the Dip, the Ramcharger, and the Sport...
As for the conversion Pop and I've done the 11" brake upgrade on the Dip using the backing plates from an 11" car. From there it was just a matter of ordering shoes, hardware, drums, etc, for the cop car. Seems to me that if you have the backing plates you could order up the drums for a 11" brake B-body.