360 Help

Hi Guy's,

I know a this question would have been asked before but all advice would be greatly appreciated.

Here is the low down I have a 360 in a 63 Valiant wagon with 727 & a 3.9 diff so far this is what I have & am about to attemped.

Motor 360 is +40 I have J heads which are getting large valves & porting, polishing & port matched. The bottom end is standard as are the conrods. I am looking at a set of KB 190 Hypo pistons hopping to get comp up to approx 10 to 1 maybe a little more is possible. It also has a set of roller rockers & I am running a Eddy Performance inlet with a 750 Holley vac sec.

Trans is 727 with 2500 stall stage 2 shift kit heavy duty cluches & bands

Rear is LSD 3.9:1

The big question is what cam do you recommend for the drag strip which can still be driven on the street...I am open to solid or hyraulic cams I am not after a ball tearer just something to have some fun with at the strip. last time out it ran a 15sec which I would like to get down to 13.

Thanks Graham.