Kelsey Hayes Caliper Bolts Wanted

-
Texas69dart340

Texas69dart340

Well-Known Member
Joined
Oct 25, 2006
Messages
185
Reaction score
2
Location
Temple Texas
The head on one of my caliper bolts is stripped and I need a replacement asap. It is one that attaches near the center. The one doesn't have thread the whole entire length. Help
 
I gave my extra one away already, but is this a pic of what you're looking for?
Maybe someone will have one for you......:cheers:

KH Spindle Bolt 002.jpg
 
Now that we know this is what you need, here is more info....:thumbup:

Overall length 2 1/4"
Shank length 1"
7/16 thread diameter
 
Anybody got one of these? I guess I just might have to change over to 73 or later set up.Anyone got one for sale. I already own a set of upper a-arms, so i will need spindles,dust shields, caliper brackets and all hardware.
 
Go to Moparts.com and post the inquiry. I believe you will find what you need for the SBC K-H setup at that website.

If you go to the large bolt pattern, remember to add the expense of changing to 4.5" LBC wheels and the rear brakes/LBC.

Doing that conversion is not as cheap as you might think, unless you have wheels and all the hardware.
 
hey i have some cores im about to send in

if you still need the bolt let me know we can figure something out
 
You can get a replacement at true value hardware. 7/16 -20 X 2".
I need a disk caliper rattle clip for kelsey and hayes, if any one has I need one. Please advise Thanks.
 
You must log in or register to reply here.
-

Back
Top