Can't get my guages to work #&#%!

Longgone said
Hello coyote- If you indeed have the rallye dash like what`s used in the 67-69 Cudas, then there is no plug-in v/limiter as Dave said. The limiter is actually inside the fuel gauge and you`ll have to pull the fuel gauge from the cluster and either send it out for repair, or remove the limiter from the gauge, and do the solid state replacement. The parts can be had at any Radio Shack for about $5.00 and it will restore a constant 5 volts to all of your gauges and steady them. If you install the chip your gauges will likely work better than they ever did.Let us know if you need any more help.

Hopefully..radio shack has the complete unit. I tried to build my own from a mopar mag. Got diodes, capsitors, chip and then ended up with a smoke filled Vehicle. (and I've take'n electronic's) :sad9:
Just for the hell of it!
If it did have the voltage limiter,,,,,it's also very important to have a piece of insulation (cardboard) between the "limiter case", probe contacts and cluster itself. If not, or insulator warn out, they limiter will short across these contacts.