TTI exhaust, is it worth it??

>>>"The driver side muffler hanger was no where near the seat belt bolt, 6" or more away! I ended up bending both of them twice, cutting the driverside in half, and re-welding it to offset the mounting hole away from the brake line tab.

The muffler hangers they provide are symmetrical and the seat belt bolts are not. The driver side seat belt bolt is further away from the driveshaft than the passenger side. The hangers they provided me did not take this in to consideration.

They may have some body styles really close to "perfect" but the 2 different A-bodies that I have worked on they missed the muffler hangers by a mile. Its a quality hanger but... you really have to work (bend,cut,drill, and weld) to make them work."

You are correct about the mis-placed hanger-support bolt holes... I had completely forgotten about that. Thanks for the reminder. But, I don't own a welder, so I didn't weld anything... Maybe I should have???

But, as far as, "With all 3 of them, I had cut and section the kick down linkage bracket on the stud at the transmission to gain clearance."....... I had already installed a Bouchillon cable kick-down system, so, I never encountered the kickdown linkage space problem.

I forgot about that, too... sorry!