New guy trying to get 1/4 windows back in

Hey Guys,

I did a search on "1/4 window install", but didn't find much. Also, I always get lost in other cool threads when I'm trying to stay "on task".

Anyway, I'm new to the board with a '68 Dart GTS. The PO had removed all the windows & regulators, sandblasted the regulators (and greased), but only replaced the rollers in the front (doors) and re-installed.

Problem is, that's where I took over. There were no 1/4 windows in the car. They were apart and in a box. I have the 3 pieces (of each side) of the regulators and quarter windows. I bought the new rollers from R/T, but no idea where to start.

- Do I put them together, then put them in?
- Do I need to put the pieces into the rear window cavity separatly and assemble in there?

I did find the diagram of how the regulators go back together, but they really look counter intuitive, as to complication, just to get a piece of glass up and down.

Any help would be great, especially a thread where somone documented this....I'm a picture guy!

Thanks,

Pete