For All You kelsey hays Brakes users
Small bolt pattern. The hub has to be separated from the rotor. Since the studs are swedged in you have to be carefull not to break the hub. Better to have a machineshop do it. You'll need new studs installed. The rotor/hub is then truely two piece with the rotor being loose. The wheel and the caliper keeos the rotor on. I'll try and take a picture.
Here's a pic
Small bolt pattern. The hub has to be separated from the rotor. Since the studs are swedged in you have to be carefull not to break the hub. Better to have a machineshop do it. You'll need new studs installed. The rotor/hub is then truely two piece with the rotor being loose. The wheel and the caliper keeos the rotor on. I'll try and take a picture.
Here's a pic
